Recover more value. Waste less. Keep production moving.
You’re being asked to manufacture with less waste. RUF Briquetting Systems help automotive OEMs and suppliers reduce waste, protect uptime, and recover more value from metal scrap and coolant.
Up to 97% coolant recovery | Up to 90% less chip volume | Higher scrap value
Briquetting metal chips with a RUF machine solves multiple challenges for automakers
Could your chip-handling process be doing more for your operations? A RUF briquetting machine typically pays for itself within 12 to 18 months by giving you immediate benefits.
- Protect production uptime through automated briquetting
- Increase scrap value, with briquettes commanding up to 50% more per pound than loose chips
- Recover up to 97% of costly fluids that may be returned to your machines
- Reduce chip volume by up to 90% for greater floor space and less waste
- Advance closed-loop goals by recovering raw materials for reuse
Briquetting applications for automotive manufacturing companies
RUF briquetting presses process aluminum, cast iron, steel and magnesium chips, as well as metal grinding sludge.
| Automotive application | Metals | Material generated |
| Transmissions & gears | Cast aluminum, aluminum die-cast | Machining chips |
| Gear grinding | Steel | Grinding sludge with oil |
| Engine blocks & heads | Cast iron, aluminum | Machining chips |
| Brake rotors and calipers | Cast iron, aluminum | Turning and grinding chips |
| E-drive & battery housings | Cast aluminum, aluminum extrusions | Machining chips |
| Magnesium components | Magnesium die-cast | Machining chips |
RUF customer results from briquetting automotive metal scrap

ZF Gusstechnologie | Aluminum Gearbox Production
The challenge: High volumes of aluminum chips from passenger-car gearbox and gear-component production.
With RUF: One briquetting press produced more than 6 million aluminum briquettes across 42,000 operating hours.
The result: Chip volume fell to 1/10 of its original size, while scrap revenue increased by more than $110 per ton (approximately €100/t).

ZF Friedrichshafen | Gear-Grinding Sludge
The challenge: Recover valuable grinding oil from sludge generated at automotive facilities in Passau and Thyrnau.
With RUF: Two briquetting presses separated the oil from the metal grinding sludge for reuse.
The result: Approximately 1.75 million liters of grinding oil recovered, representing roughly $2.4 million in value, with ROI on the briquetting machine in less than six months.
Create significant value with one RUF metal briquetting machine
Some briquetting systems require multiple pieces of equipment to make their machine work as well as RUF’s metal briquetting machines. Our hydraulic presses use high pressure to compact metal, separate and recapture fluid in one continuous process, configured to your production line.
Questions automotive manufacturers ask us about briquetting
RUF briquetting systems can process grinding sludge, cast iron chips, aluminum chips, magnesium, and steel chips from automotive manufacturing. The right system depends on the material, its fluid content, and how much volume your operation produces. A free press test of your material shows how your scrap performs and helps us select the right press for your operations.
Yes, lthough it depends on what you want to accomplish. A centrifuge or chip spinner can remove coolant. A RUF hydraulic briquetting press does more. It recovers up to 97% of cutting fluids and turns loose chips into dense, dry briquettes that take up less space, cost less to transport, and can command a higher scrap value.
With a RUF briquetter, you’re recovering more value from both the coolant and the metal. And with a typical ROI of roughly 12 to 18 months, the added capability can pay for itself quickly.
Often, yes. Loose, wet chips lower the value. Dense, dry briquettes give recyclers and smelters a cleaner, more consistent material. RUF briquetting machines create the highest density briquettes in the industry, which makes the metal worth more to smelters. Automotive applications have seen scrap value increase 30 to 50% per pound, with some RUF customers realizing even greater gains.
Yes. If you start the briquetting process with single-origin chips, you know the material you’re putting into the press. RUF systems can also be configured to keep alloys separated when required for recycling or remelt. Residual moisture can typically be reduced to approximately 1 to 3%
Up to 97% of cutting fluids can be recovered from metal chips with automotive briquetting. Instead of paying to haul valuable coolant away with your scrap, you may be able to put it back into your machining process
Briquetting can make magnesium chips safer to store and handle by reducing loose surface area and residual moisture, two factors associated with reactive-chip fire risk.
The result is a denser, drier material that’s easier to manage.
For many RUF briquetting systems, ROI falls within 12 to 18 months. Each company’s payback depends on their scrap volume and value, coolant recovery, transportation costs and other operating factors. Some automotive installations have paid for themselves considerably faster.
The best way to understand your potential ROI is to test your material.


