Briquetting for the aerospace industry

Improve automation with better scrap handling and metal recovery

You’re managing high-value metal chips while working toward safer handling, zero-waste manufacturing, and more automated production. A RUF briquetting system supports these goals while increasing the value of metal scrap.

The industry’s densest briquettes | Up to 97% coolant recovery | A system configured for your production line

How much labor, coolant, and recoverable metal is tied up in your chip-handling process?

  1. Buildup of metal chips threatens uptime and requires more operator attention.
  2. Coolant leaves with the chips, increasing fluid consumption and disposal costs.
  3. Loose chips consume floor space and require more pickups.
  4. Scrap loses value to recyclers and smelters when it has excess fluid and low density.
  5. Closed-loop recycling goals are hard to fulfill, as valuable metals can’t easily return to the material stream.

Metal briquetting creates significant value for aerospace companies

RUF presses apply up to 71,000 psi of pressure to compress metal chips into dense, consistent briquettes. These briquettes are worth 30 to 50% more per pound than loose chips.

Prepare separated metal chips for recycling or remelt and recover up to 97% of cutting fluids for reuse.

Cut manual labor up to 50% so your team can spend more time supporting production.

ROI for a RUF metal briquetting machine is typically 12 to 18 months, with some installations paying back faster.

Briquetting applications for aerospace manufacturing

Explore briquetting by material:

Aerospace applicationMetalsMaterial generated
Aircraft structural componentsAluminum alloys, titaniumMachining chips
Engine and propulsion componentsTitanium, specialty alloysTurning and milling chips
Landing gear componentsSteel, titaniumMachining chips
Spacecraft and launch componentsAluminum alloys, titaniumMachining chips
Lightweight housings and componentsMagnesium alloysMachining chips

RUF is the leading manufacturer of metal briquetting machines in North America

  • More than 6,000 briquetters installed worldwide
  • Every machine is designed, built, and tested in-house for reliable performance
  • Metal briquetting systems are configured around your material, production requirements, and existing operations for better compaction, handling, and scrap value.
  • Responsive, U.S.-based parts and service keeps your operations running.
  • Precise, autonomous machines are built to run for decades with minimal maintenance.

RUF customer results from briquetting aerospace metal scrap

Carbomill AG | Aluminum component production

The challenge: A major aerospace order pushed aluminum chip volumes to approximately 9 to 11 U.S. tons a week. Handling the loose chips took time and space, while up to 53 gallons of coolant left with them each day.

With RUF: A briquetting press receives chips directly from the machining center, compresses them, and sends recovered coolant back to a treatment system.

The result: Chip volume dropped to roughly one-eighth of its original size. Carbomill reduced logistics costs, increased recycling revenue, and projected payback in less than two years.

RUF briquetters are customized for your aerospace production needs

We don’t do one-size-fits-all, because it doesn’t. Because briquetting is our specialty, we work through the details of your metals and alloys, volumes, and production requirements to configure each proven RUF press.

See what your metal scrap can produce. Test your metal for free.

Send RUF a sample of your chips for a free press test. You’ll see the briquette quality and fluid recovery possible with your material, and we use the data to customize a press for your operations.

What to know before choosing an aerospace briquetting system

RUF can briquette aluminum, titanium, magnesium, and certain superalloys used in aerospace manufacturing. The right press depends on your alloy, chip condition, and production volume. Send us a sample, and we’ll test its briquette quality, fluid recovery, and throughput before recommending a system.

Start with a press test of your own chips. RUF evaluates briquette density, fluid recovery, and throughput so you have results to compare with your production needs. Sample briquettes also give you something tangible to review with your recycler or remelt facility. For RUF customer UTM, aluminum briquettes achieved 1.1%–1.8% residual moisture, below its 2% threshold for optimum scrap returns.

That depends on the materials, volumes, and requirements for keeping alloys separate. RUF evaluates those factors before recommending a press and material-handling configuration. Discuss each material stream with our team, including any specialty alloys.

Briquetting prepares separated chips for handling and recycling while recovering cutting fluid for potential reuse. Returning that metal to a particular manufacturing process depends on alloy separation, contamination controls, and the requirements of the facility receiving it.

RUF systems can recover up to 97% of cutting fluids from suitable metal chips. Your results depend on the material and its starting fluid content. A press test shows what you can expect from your scrap

Compare briquette density, coolant extraction, throughput, system integration, and service support. Review all equipment needed to achieve the results you want, along with the labor required to operate it. Testing your material gives you a stronger basis for evaluating each proposal. RUF offers free material tests and comprehensive U.S. based parts and support to ensure our machines work efficiently for years to come.

Aerospace manufacturers want to reduce landfill waste, automate scrap handling, and spend fewer labor hours moving chips. Keeping automated machining cells running is another priority, especially when manual bin changes interrupt production. Briquetting also helps manufacturers recover coolant for reuse and prepare valuable metal for recycling, supporting efforts to keep more material within their operations or supply chains.